Product ID:EPOXY RESIN FE-0004-A
MSDS Date:01/26/1990
FSC:8040
NIIN:00-270-8137
Kit Part:Y
MSDS Number: BJQQK

H.B. FULLER COMPANY

1200 WOLTERS BLVD
VADNAIS HEIGHTS, MN 55110
US

Emergency Phone: 612-481-3300

Info Phone: 612-481-3300

Cage: 9R359

H.B. FULLER COMPANY-FOSTER PRODUCTS DIVISION

ST. PAUL, MN 55126-8076 US

Telephone: 612-236-5300/ -5309 FAX

Cage: 9R359

EPOXY RESIN

Fraction By Weight: > 10%

SILICA-AMORPHOUS

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-10%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

CALCIUM CARBONATE (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 1-10%

OSHA PEL 15 MG/M3; 5 MG/M3

ACGIH TLV: 10 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:POTENTIAL DERMAL SENSITIZER. NO
ANTICIPATED CHRONIC EFFECTS.
Explanation of Carcinogenicity:THIS PRODUCT DOES NOT CONTAIN REGULATED
LEVELS OF NTP, IARC OR OSHA LISTED CARCINOGENS.
Effects of Overexposure:EYES: DIRECT EYE CONTACT WITH THE PRODUCT MAY
CAUSE IRRITATION. SKIN: EPOXY RESINS ARE POTENTIAL DERMAL
SENSITIZERS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
ILLNESSES.

First Aid:EYES: FLUSH IMMEDIATELY WITH WATER FOR 15 MINUTES. CONSULT A
PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH AFFECTED AREA WITH
SOAP AND WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.

Flash Point Method:TCC
Flash Point:> 200F/> 93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:PERSONS EXPOSED TO PRODUCTS OF COMBUSTION
SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE
EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
MATERIAL. RESIDUE MAY BE REMOVED WITH CHLORINATED SOLVENT.

Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION.
Other Precautions:AVOID SKIN CONTACT WITH PRODUCT AT ALL TIMES.

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:USE RUBBER GLOVES.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:APPROPRIATE PROTECTIVE CLOTHING. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Work Hygienic Practices:WASH HANDS AFTER EACH USE OF THIS PRODUCT
Supplemental Safety and Health
NONE

HCC:V7
Spec Gravity:10.4 LBS/GAL
Appearance and Odor:LIQUID

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS AND CARBON MONOXIDE.

Waste Disposal Methods:NOT HAZARDOUS WASTE.INCINERATE OR DISPOSE OF IN
AN APPROVED INDUSTRIAL LANDFILL;CONSULT YOUR STATE OR LOCAL
AUTHORITY IN THE EVENT MORE RESTRICTIVE REQUIREMENTS APPLY.FOR
ADDITIONAL WASTE DISPOSAL ASS ISTANCE CONSULT H.B. FULLER
ENVIRONMENTAL SERVICE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.